Bidets have moved from novelty to everyday upgrade, and we install them in Markham homes every week, from simple bidet seats that replace your existing toilet seat to standalone fixtures and full washlet-style units with heated seats, warm water and air drying.
The plumbing side is usually straightforward: a tee on the toilet's supply line and, for electric models, a nearby GFCI-protected outlet. We handle the water connections, check for leaks and make sure the unit is mounted securely and works the way it should before we leave.
Bidet Installation Around Markham
Bidet seats are one of the most common upgrades we do in Markham's newer townhomes and condos, where bathrooms are compact and a standalone bidet won't fit. The main limitation is usually the electrical outlet, since many builder bathrooms only have one by the vanity.
For seniors aging in place, a bidet seat paired with a comfort-height toilet is a simple change that makes a real difference, and we install both in a single visit.
Signs You Need Bidet Installation
Homeowners usually call us about a bidet when:
- You want better hygiene and comfort. Warm-water washing is gentler than paper and helpful for sensitive skin or mobility limitations.
- Someone in the home has limited mobility. A bidet seat can restore independence for seniors and people recovering from surgery.
- You're renovating the bathroom. Renovation time is the easiest moment to add the outlet and supply a bidet needs.
- You want to cut paper use. Many households switch mainly to reduce toilet paper, which also means fewer clogs.
- Your current seat leaks or won't stay put. A poorly installed bidet seat can drip at the tee connection or shift on the bowl.
How We Do It
- 1
Confirm the model and fit
We check your toilet shape, the supply location and whether an electrical outlet is within reach.
- 2
Shut off and drain
We close the supply valve and drain the line before opening any connections.
- 3
Install the tee and supply
A quality tee fitting goes on the toilet supply, with a new flexible line to the bidet.
- 4
Mount and connect the unit
The seat or fixture is mounted level and connected per the manufacturer's instructions.
- 5
Test every function
We run the wash, check every joint for drips and show you the controls.
Why Choose Markham Plumbing
The most common bidet problems we see are leaks at cheap plastic tee fittings and seats that wobble because the mounting plate wasn't tightened evenly. We use quality fittings, torque the connections properly and test under pressure, so the upgrade you bought for comfort doesn't become a slow leak behind the toilet.
- Quality fittings, not plastic tees
- Electric and non-electric models
- Leak-tested connections
- Works with most toilets
Bidet Installation FAQs
Do I need an electrician for a bidet seat?
Electric models need a GFCI outlet within reach of the cord. If you don't have one, an electrician can add it, and renovation time is the cheapest moment to do that.
Will a bidet seat fit my toilet?
Most seats fit standard round or elongated bowls. We'll confirm the shape and bolt spacing before installation.
Can a bidet cause a leak?
Any added connection can leak if installed poorly. We use quality tees and new supply lines, then test every joint under pressure.
Do non-electric bidets use hot water?
Basic models use cold water only. Some non-electric models can tee into a nearby sink's hot supply if the layout allows it.
Do bidets need much maintenance?
Very little. Wipe the seat and nozzle area with mild cleaner, and replace the seat's filter if the model has one. We'll show you the basics at installation.
Can a bidet be added to a basement bathroom?
Yes, as long as there's a supply line and, for electric models, an outlet. Basement bathrooms with up-flush systems may limit model choice, and we'll confirm before you buy.