A new toilet can solve a lot of small annoyances at once: a wobbly base, a tank that sweats in summer, a weak flush, or a dated style that no longer suits the bathroom. Modern toilets flush better on less water, and comfort-height models make life easier for knees and backs. In many Markham homes the original builder-grade toilet has simply reached the end of its useful life.
We supply and install quality toilets, or we can install a toilet you've already purchased. Either way, the job includes removing the old unit, checking the flange and shut-off valve, setting the new toilet level and sealed, and hauling the old one away.
Toilet Installation Around Markham
In many Markham subdivisions built in the 1990s and 2000s, the original builder toilets are reaching the end of their life at the same time. We often replace two or three in one visit, which saves a second trip. If your ensuite and main bath toilets are the same age, it's worth doing them together.
Older homes in Markham Village and Unionville sometimes have 10 or 14 inch rough-ins instead of the modern 12 inch standard. We measure before quoting so the toilet you pick actually fits.
Signs You Need Toilet Installation
It may be time to replace rather than repair your toilet if you notice:
- Cracks in the bowl or tank. Even hairline cracks can fail suddenly, and a tank crack can release a lot of water at once.
- Frequent repairs. If you've replaced the flapper, fill valve and handle more than once, the fixture itself is wearing out.
- A rocking or loose base. Movement at the base breaks the wax seal and can let water damage the floor below.
- Constant running or phantom flushes. Worn internal surfaces that no longer seal properly waste water around the clock.
- Staining and mineral buildup. Heavy scale in the bowl and rim jets weakens the flush and is hard to reverse.
How We Do It
- 1
Measure and confirm fit
We check the rough-in distance, clearances and water supply position so the new toilet fits the space.
- 2
Remove the old toilet
We shut off the water, drain the fixture, unbolt it and inspect the flange and floor for damage.
- 3
Prepare the connection
We repair or replace the flange if needed and fit a new supply line and shut-off if the old one is tired.
- 4
Set and seal the new toilet
The new unit is set level on a fresh seal, bolted evenly and connected.
- 5
Test and clean up
We flush repeatedly, check for leaks at every joint, and take the old toilet away.
Why Choose Markham Plumbing
A toilet looks simple, but most leaks we get called about trace back to a rushed installation: an uneven flange, an over-tightened bolt or a reused wax ring. We take the few extra minutes to check the flange and floor before the new toilet goes in, so you don't end up with a soft floor or a stained ceiling downstairs a year later.
- Flange and floor checked first
- New supply line included
- Old toilet hauled away
- Level, sealed, tested
Toilet Installation FAQs
Can you install a toilet I bought myself?
Yes. We'll confirm it's the right rough-in size for your bathroom before we start, and install it with a new seal and supply line.
How long does a toilet installation take?
A straightforward swap usually takes about an hour. Flange repairs or floor issues add time, and we'll tell you before doing that work.
What is a rough-in measurement?
It's the distance from the finished wall to the centre of the drain bolts, most commonly 12 inches. Some older Markham homes have 10 or 14 inch rough-ins, which limits model choice.
Should I choose a comfort-height toilet?
Comfort-height bowls sit a couple of inches higher and are easier for most adults and seniors. For small children, standard height can be more practical.
Do you install dual-flush toilets?
Yes. Dual-flush models use less water for liquid waste and are a popular upgrade in Markham homes.